Plumbing supplies can cover a wide range of items, from piping to pumps, from plumbing tools to heating systems. The external links provided for you should cover all the needs for any plumber looking for supplies.

Supplies for plumbing come in many forms, from dishwasher drain fittings to washers nuts gaskets and slip joint parts, from solvents and sealers to air heating, plummbing tools down to plain and simple valves. On this page you can see a couple of examples of plumbing equipment that are used every day, on the right of the page are links to companies that supply the above mentioned plumbing supplies and more.

Domestic Circulator Pumps
DAB domestic heating circulator pumps. Suitable for open vented and sealed systems, and also for solar energy systems.1.1/2" BSP parallel male.

Features include cast iron pump body, wet rotor pump, two pole asynchronous motor, ceramic thrust washer, motor shaft in tempered stainless steel, rotor protection jacket in stainless steel and techno-polymer impeller. 130 mm port to port dimension makes them ideal for replacing the vast majority of old circulators.

VA55

The VA55/130 has three speed settings which as follows:
Speed 1 is going at the speed of 1330 RPM using a input of 45 watts with a 0.24 amp.
Speed 2 is more faster at 1815 RPM with a input of 64 watts using 0.29 amps.
On the top speed setting of 3 the RPM is 2330 with a 82 watt input using 0.36 amps.
The VA55/130 is priced at £22.95.

The VA55/130 is priced £26.75 ans has the three following settings:
Speed setting 1 is running at 1050 RPM using a input of 51 watts with a 0.24 amp.
Speed setting 2 is faster at 1460 RPM with a input of 78 watts using 0.35 amps.
On the top setting of 3 the RPM is 2100 with a 102 watt input using 0.45 amps.

These products can be viewed and bought at BES Ltd along with a selection of other pumps.